LiftLastsGear that still works later
LiftLasts may earn a commission when a buy link is a tracking link. The buttons here are still direct product links, so those clicks pay nothing.Affiliate disclosure. IPF status comes from the approved list updated 8 April 2025, not from product titles.

Buying guide

Best powerlifting singlets

Updated 2026-11-19. IPF list used: 8 April 2025.

A singlet is the one piece of gear every raw lifter must own and the one people research least. Two things matter: whether the maker is on the federation list, and whether the fabric survives a bar dragged over it every week.

The IPF technical rules, section 3.1, require a non-supportive singlet from a manufacturer on the approved list. It must be one-piece and form-fitting, a single thickness except for a crotch panel up to 12 cm by 24 cm, with legs from 3 cm to 25 cm measured from the top of the crotch while standing. Straps stay over the shoulders on every lift.

USAPL v2026.2, section 3.4, uses the same thickness and leg limits. It adds that the legs may not touch your knees or sleeves, and that the singlet may not have metal or added straps. Section 3.1.7 says there is no USAPL brand list for singlets.

What was on the pages

SBD’s men’s powerlifting singlet is the most detailed listing: heavyweight 350gm double jersey with Meryl and Lycra fibers, made in Sheffield, $115 for the Classic colorway and $120 for most others. It is hand wash only. SBD says it is IPF approved. The list has “SBD Powerlifting Singlets,” IDs 234 and 235, and “SBD Singlets IPF,” IDs 231 to 233, with no public map to a colorway, so the sheet shows all of them. Leg length is not published. The only durability reports on file are from 2017, before SBD described the current fabric. One owner said the front pilled where the bar knurling touched it on paused bench after five wears. Another saw beading but said the stitching still looked solid.

Gymreapers’ Apex singlet is 90% polyester and 10% spandex, single ply, with an 8.5-inch inseam, $118 on the black page, which showed as sold out when checked. It can be machine washed cold and hung to dry. The IPF list has “Gymreapers Singlet,” ID 1, and Gymreapers’ certifications page maps the Men’s Apex Singlet to that ID. 8.5 inches is about 21.6 cm, inside the 25 cm limit, but a garment inseam is not measured the way referees measure, so the sheet does not call it a confirmed pass. Returns are not accepted, only size exchanges. No independent long-term wear report for this singlet was found.

Inzer’s Power Singlet is $85 and sold as a compression singlet for raw lifting. Inzer’s Lifting Singlet is $36.95, the cheapest singlet on the IPF list here. Neither page gives fiber content, leg length, or care instructions. The IPF list has one line, “INZER Singlets – (various colors),” ID 267, which covers both by name; the “IAD Singlet,” ID 268, is a different item. A 2019 T Nation post says an Inzer singlet’s crotch elastic dry-rotted and blew out after two uses in a year, found a week before a meet. The poster did not say which Inzer model, so the report is not attached to either sheet.

What this guide leaves out

Rogue is on the IPF list for belts and a knee sleeve, not for a singlet. Titan, A7, Eleiko, and others have singlets on the list but are not covered yet because they have not been spec-checked here. Nobody behind this site has trained in any of these singlets. The only first-hand review is the IBRO belt, and IBRO is not on the IPF list.

Spec cells are the manufacturer’s wording, shortened where a listing disagrees with itself. Open the sheet under the table for the conflict and the source link.
ProductMaterialLeg lengthIPF listPrice checked
SBD men's powerlifting singlet (Classic)Heavyweight 350gm double jersey fabric with Meryl and Lycra fibers, developed in Great Britain.Not stated on the product page.Listed, ID 234, 235, 231, 232, 233$115.00
Gymreapers Apex singlet, black (men's)90% polyester, 10% spandex. Single-ply construction with quad and shoulder panels.8.5-inch inseam.Listed, ID 1$118.00
Inzer Power SingletFiber content not stated. Inzer describes a compression fit and a moisture-wicking fabric design.Not stated on the product page.Listed, ID 267$85.00
Inzer Lifting SingletFiber content not stated. Inzer calls the fabric "the most durable fabric for a non-supportive lifting singlet".Not stated on the product page.Listed, ID 267$36.95

SBD men's powerlifting singlet (Classic)

SBD· Specs checked 2026-11-19· Not tested by the site owner

On the IPF list

IPF Approved List of Personal Apparel and Equipment, 2023–2026, updated 8 April 2025. “SBD Powerlifting Singlets”, IPF ID 234, Equipped & Classic. “SBD Powerlifting Singlets”, IPF ID 235, Equipped & Classic. “SBD Singlets IPF”, IPF ID 231, Equipped & Classic. “SBD Singlets IPF”, IPF ID 232, Equipped & Classic. “SBD Singlets IPF”, IPF ID 233, Equipped & Classic. Approved list PDF

Material
Heavyweight 350gm double jersey fabric with Meryl and Lycra fibers, developed in Great Britain. SBD product page
Leg length
Not stated on the product page. SBD product page
Sizing
By bodyweight, XS (under 50 kg) to 5XL (145 kg and up). SBD says to go up a size if you are tall for your weight and down a size if you are short. SBD product page
Care
Hand wash in warm water with a mild detergent and air dry. SBD says dryer heat can affect the material. SBD product page
Made in
Sheffield, Great Britain. SBD product page
Price when checked
$115.00. Price shown on the US product page for the Classic colorway. The Serenity, Nova, Resolve, Aspire, Forge, and Legacy colorways listed at $120 in the store data. The women's cut is a separate product, also $115. Source, 2026-11-19
Warranty
A durability warranty is not stated on the product page we checked. SBD Apparel USA's terms disclaim express and implied warranties. Source

SBD's page says the singlet is IPF approved and IWF, USAPL, and USPA compliant. The IPF list has "SBD Powerlifting Singlets", IDs 234 and 235, and "SBD Singlets IPF", IDs 231, 232, and 233. There is no public map from this colorway to one ID, so the sheet shows all five.

SBD does not publish the inside leg length. The IPF and USAPL limit is 3 cm to 25 cm from the top of the crotch down the inside of the leg, measured standing.

Exchanges for a different size are accepted within 30 days of delivery, at the customer's postage cost.

Common failure points

A 2017 owner said the front of an SBD singlet pilled where the bar knurling touched it on paused bench, after five wears. The post predates the current 350gm fabric description, so it may be an older version.

“I have an SBD singlet that I've worn 5 times. The front of the singlet is all "pilled" up where the bar center knurling touches it when doing the paused bench. I wouldn't buy another one for that reason.”

skid, Starting Strength forum, 12 June 2017. Source

Other linked owner reports

Another 2017 owner saw beading on the fabric but said the stitching still looked solid.

“I'm sure it's mostly cosmetic as the stitching on the reverse still looks rock solid, but I'm not sure if this will be problematic over time.”

marcf, Starting Strength forum, 8 June 2017. Source
Open at SBDDirect link

Plain product URL. No tracking link is configured.

Gymreapers Apex singlet, black (men's)

Gymreapers· Specs checked 2026-11-19· Not tested by the site owner

On the IPF list

IPF Approved List of Personal Apparel and Equipment, 2023–2026, updated 8 April 2025. “Gymreapers Singlet”, IPF ID 1, Equipped & Classic. Approved list PDF

Material
90% polyester, 10% spandex. Single-ply construction with quad and shoulder panels. Gymreapers product page
Leg length
8.5-inch inseam. Gymreapers product page
Sizing
By bodyweight, Small (115-135 lb) up to 3XL. The model is 5 ft 10 in, 185 lb, in a Medium. Gymreapers product page
Care
Machine wash cold with like colors, hang dry only. No iron, bleach, or dry cleaning. Gymreapers product page
Price when checked
$118.00. Sale price shown on the black product page. The black singlet showed as sold out when checked. Source, 2026-11-19
Warranty
No singlet warranty is stated on the product page. Returns are not accepted; size exchanges only. Source

The IPF list has "Gymreapers Singlet", ID 1. Gymreapers' certifications page maps "Men's Apex Singlet" to IPF ID 1.

8.5 inches is about 21.6 cm. The IPF and USAPL leg rule is 3 cm to 25 cm measured from the top of the crotch while standing. A garment inseam is not necessarily measured the same way, so the site does not call this a confirmed pass.

The page says singlets can only be exchanged for a different size. No returns are accepted.

Common failure points

No linked long-term failure report is on file. That is not a claim that the product never fails.

Open at GymreapersDirect link

Public affiliate terms were not available when this site was built. Leave affiliate_url empty and use the plain product URL.

Inzer Power Singlet

Inzer· Specs checked 2026-11-19· Not tested by the site owner

On the IPF list

IPF Approved List of Personal Apparel and Equipment, 2023–2026, updated 8 April 2025. “INZER Singlets – (various colors)”, IPF ID 267, Equipped & Classic. Approved list PDF

Material
Fiber content not stated. Inzer describes a compression fit and a moisture-wicking fabric design. Inzer product page
Leg length
Not stated on the product page. Inzer product page
Sizing
By bodyweight, XS (95-114 lb) through XL (195-230 lb) and up. Black, purple, vivid pink, and California blue. Inzer product page
Price when checked
$85.00. Same price for every size and color in the store data. Source, 2026-11-19
Warranty
No separate singlet warranty is stated on the product page. Inzer's support page describes size exchanges within two weeks for unused gear and a general performance guarantee. Source

Inzer's page says the Power Singlet is IPF approved for all competitions. The IPF list has one line for "INZER Singlets – (various colors)", ID 267, and does not name the Power Singlet separately.

Inzer markets it as a compression singlet for raw lifting. The IPF and USAPL rules say a singlet must give no support in the execution of a lift; the brand's compression claim is not a federation ruling.

Common failure points

No linked long-term failure report is on file. That is not a claim that the product never fails.

Open at InzerDirect link

Plain product URL. No tracking link is configured.

Inzer Lifting Singlet

Inzer· Specs checked 2026-11-19· Not tested by the site owner

On the IPF list

IPF Approved List of Personal Apparel and Equipment, 2023–2026, updated 8 April 2025. “INZER Singlets – (various colors)”, IPF ID 267, Equipped & Classic. Approved list PDF

Material
Fiber content not stated. Inzer calls the fabric "the most durable fabric for a non-supportive lifting singlet". Inzer product page
Leg length
Not stated on the product page. Inzer product page
Sizing
By bodyweight, XS (85-114 lb) through 2XL (230-270 lb) and up. Navy, royal blue, red, and black. Inzer product page
Price when checked
$36.95. Same price for every size and color in the store data. Source, 2026-11-19
Warranty
No separate singlet warranty is stated on the product page. Inzer's support page describes size exchanges within two weeks for unused gear and a general performance guarantee. Source

Inzer's page says all Inzer singlets are approved for all competitions worldwide, including IPF. The IPF list has "INZER Singlets – (various colors)", ID 267. The "IAD Singlet", ID 268, is a different item.

No fabric content, leg length, or care instructions are on the page.

Common failure points

No linked long-term failure report is on file. That is not a claim that the product never fails.

Open at InzerDirect link

Plain product URL. No tracking link is configured.

Questions

Does my singlet have to be on the IPF approved list?

In IPF competition, yes. The IPF technical rules allow only non-supportive singlets from manufacturers on the approved list, and the singlet must still meet the technical rules. USAPL Rulebook v2026.2 section 3.1.7 says only supportive suits and shirts need to be on a USAPL list; a singlet only has to meet the specifications in section 3.4.

How long can singlet legs be?

Both the IPF technical rules and USAPL section 3.4.6 say the legs must run at least 3 cm and at most 25 cm from the top of the crotch down the inside of the leg, measured while standing. USAPL also says the legs must not touch the knees, knee sleeves, or knee wraps. Of the four singlets here, only Gymreapers publishes a leg number, an 8.5-inch inseam.

Is Rogue's singlet IPF approved?

The Rogue section of the IPF Approved List 2023-2026 (updated 8 April 2025) lists a 7 mm knee sleeve and three belts. It has no Rogue singlet, so this guide does not include one.

Do I need a t-shirt under the singlet?

The IPF requires a t-shirt under the singlet for squat, bench press, and deadlift. USAPL requires one for squat and bench press, and section 3.5.1.1 makes it optional in the deadlift.