LiftLastsGear that still works later
LiftLasts may earn a commission when a buy link is a tracking link. The buttons here are still direct product links, so those clicks pay nothing.Affiliate disclosure. IPF status comes from the approved list updated 8 April 2025, not from product titles.

Buying guide

Best powerlifting belts

Updated 2026-11-18. IPF list used: 8 April 2025.

This is not a ranked top ten. A belt earns a place here when the maker’s page states the closure, thickness, material, and warranty, and when the IPF list either names it or does not. There is no LiftLasts score.

The site owner has used an IBRO belt and names Rogue Fitness and Gymreapers as high-quality brands. Only the IBRO belt is first-hand. The Rogue and Gymreapers lines below are on the IPF list. The brand judgment is the owner’s. The specs are the manufacturers’.

The list, not the title

The IPF approved list updated 8 April 2025 is the approval source. It runs through 31 December 2026. IPF Technical Rules, section 3.6, say a competition belt comes from that list. The body is leather, vinyl, or another non-stretch material, in one or more layers, with no extra padding. The buckle is one prong, two prongs, or a lever. Width is at most 10 cm. Thickness along the main length is at most 13 mm.

USA Powerlifting’s rulebook v2026.2 is a different system. Section 3.1.7 says there is no approved list for belts. Section 3.14 says the belt is worn outside the singlet and may not exceed 10 cm in width. The buckle may be wider. That section does not state a thickness cap. A manufacturer saying “USAPL approved” is not a USAPL list entry, because the list does not exist for belts.

Several belts on this page are sold as 4 inches wide. Four inches is 10.16 cm. SBD states 10 cm. Rogue, Gymreapers, and IBRO state 4 inches, or “4 inches of back support.” Belts sold as 4 inches can still have an IPF list entry. The referee measures the belt you bring, not the product title.

Lever or prong

Both are legal in the IPF. A lever is set to one tightness and then opens and closes without hunting for a hole. A prong belt moves hole to hole. SBD describes its lever as a gliding lever with the adjustability of a prong and the tightness of a lever. Rogue’s 13 mm prong belt is a single prong. The 3 inch Ohio belt is a double prong.

The failure reports filed on this page are mostly hardware. Gymreapers owners describe levers snapping, pins walking out, and latches opening at the bottom of a squat, and also describe free replacements under the lifetime guarantee. An SBD owner describes the end of a lever breaking off during squats, and a replacement from SBD. A five-year Rogue lever review says the lever held 600-plus squats and 700-plus deadlifts, and that the flat-head screws that hold the lever on strip. A 2014 Inzer thread describes lever castings and hinge pins as the parts that break, and also includes a lifter who had not seen a failure among a few dozen local Inzer levers. Prong belts in this set do not have a matching failure report on file. That is a gap in the file, not proof that prongs last longer.

10 mm or 13 mm

Thirteen millimetres is the IPF ceiling, not a requirement. Inzer’s 13 mm page is for people who want maximum thickness, and Inzer tells XS and Small buyers to take the 10 mm lever. Inzer’s 10 mm page says that thickness conforms sooner. SBD’s 13 mm belt is four layers of British cowhide, 13 mm by 10 cm. SBD’s 10 mm belt is two cuts of hide, with rounded edges and a lower buckle, also 10 cm wide. Both classic SBD belts were $310 on the US site when checked.

Rogue’s 13 mm lever and 13 mm prong are on the IPF list (IDs 181 and 182). The 3 inch Ohio is 10 mm, double prong, and on the list (ID 183). The 4 inch Ohio is also 10 mm and is not that list entry.

IBRO’s all-black page is titled 13 mm and then says 10 mm in the description. The separate black-and-white page is 10 mm in both places. Neither is on the IPF list. The owner’s write-up of the belt they actually wear is on the IBRO review.

What the sheets leave out on purpose

Gymreapers’ 13 mm lever page does not say whether the belt is the hard lever (IPF ID 4) or the soft lever (IPF ID 5). Both IDs cover 10 mm and 13 mm. The product page also does not name the outer hide. It says durable materials, double stitching, a suede interior, and a lifetime replacement guarantee. The price on the page was $195, next to a restock notice that did not agree with the in-stock flag in the page data.

Inzer does not print a width in centimetres. The page says the edges are not rounded so the full competition-legal width remains. Inzer also describes an internal “Reinforced Leather” piece. A 2020 comment says there is plastic in the belt. Both are linked on the sheet. This site has not cut a belt open.

No Rogue belt page we checked stated a warranty. Rogue’s warranty index is product by product, and the extracted text did not name these belts.

Spec cells are the manufacturer’s wording, shortened where a listing disagrees with itself. Open the sheet under the table for the conflict and the source link.
ProductClosureThicknessWidthIPF listPrice checked
Rogue Black Leather 13mm 4-inch lever beltPatented nickel-plated steel lever with a matte black finish.13 mm.4 inches.Listed, ID 181$158.00
Rogue 13mm powerlifting beltSingle prong buckle with a seamless roller.13 mm is in the product name. The specifications list on the same page leaves the Thickness line blank.4 inches, in the gear specs.Listed, ID 182$152.50
Rogue 3 inch Ohio beltDouble prong buckle with a seamless roller and bright zinc finish.10 mm.3 inches.Listed, ID 183$113.00
Rogue Ohio lifting belt, 4 inchSingle prong buckle with a seamless roller.10 mm, plus or minus 1 mm.4 inches.Not listed$131.00
Gymreapers 13mm lever beltLever. The page says "programmable lever buckle adjustment" and does not say whether this SKU is the hard or soft lever.13 mm, described as consistent through the belt (0.51 inches).Listed as "Lever belt height: 4 inches."Listed, ID 4, 5$195.00
SBD 13mm lever beltPatented gliding lever. SBD says it has the adjustability of a prong belt and the tightness of a lever.13 mm. SBD calls this the maximum a powerlifting belt is allowed to be.10 cm.Listed, ID 236, 237$310.00
SBD 10mm lever beltPatented gliding lever, described as a low-profile buckle.10 mm.10 cm.Listed, ID 236, 237$310.00
Inzer Forever Lever Belt 13mmPatented lever. Inzer says it can be set up to three inches tighter than a standard buckle.13 mm. Inzer describes this as the choice for lifters who want maximum belt thickness, and recommends the 10 mm belt for XS and Small.Not given as a measurement. Inzer says the edges are not rounded so that "the complete competition legal width is maintained."Listed, ID 272$139.00
Inzer Forever Lever Belt 10mmPatented lever.10 mm. Inzer says it conforms sooner and is considered by some to be more comfortable.Not given as a measurement. Same "competition legal width" wording as the 13 mm page.Listed, ID 272$129.95
IBRO 13mm lever belt, all blackSteel lever. IBRO calls it a quick lever closure.Conflicts on the same page. The title says 13 mm. The description then says the belt has 10 mm thickness.4 inches of back support, which is IBRO's phrase.Not listed$69.99
IBRO 10mm lever belt, black and whiteSteel lever. IBRO calls it a quick lever closure.10 mm in both the title and the description.4 inches of back support, which is IBRO's phrase.Not listed$69.99

Rogue Black Leather 13mm 4-inch lever belt

Rogue Fitness· Specs checked 2026-11-18· Not tested by the site owner

On the IPF list

IPF Approved List of Personal Apparel and Equipment, 2023–2026, updated 8 April 2025. “Rogue 13mm Lever Belt”, IPF ID 181, Equipped & Classic. Approved list PDF

Closure
Patented nickel-plated steel lever with a matte black finish. Rogue product page
Thickness
13 mm. Rogue product page
Width
4 inches. Rogue product page
Material
Gear specs say 100% vegetable-tanned sole leather. The description also says 100% genuine sole leather, with a black suede liner. Rogue product page
Made in
USA. The gear-spec brand field on the page says Pioneer. Rogue product page
Price when checked
$158.00 (page also showed $175.00). Structured data and the page showed $158 next to a $175 normal price. Source, 2026-11-18
Warranty
No warranty term is stated on the product page. Rogue's warranty index is written product by product, and the text extracted from it did not name this belt. Source

The page says Pioneer belts tend to run one size larger than most weightlifting belts.

IPF maximum belt width is 10 cm. This page sells the belt as 4 inches, which is 10.16 cm. The IPF list still has an entry for the Rogue 13 mm lever belt. A referee measures the belt in your hand.

Common failure points

A reviewer who says they have used two of these belts for five years reports that the flat-head screws holding the lever on strip fairly easily.

“The only improvement I would like is directed at the screws that hold the lever on. My weight fluctuates depending on if I'm cutting or bulking. The provided screws are flat head and strip fairly easily.”

AchlysAug, Rogue product-page review, April 2025. Source

Other linked owner reports

The same five-year review reports no fraying and a lever that held heavy squats and deadlifts.

“I have 2 of these and have been using them for 5 years now. They're excellent. It will take a bit of time to break it in. I have had zero fraying and zero staining like other belts. The lever is very robust and has held during +600lb squats and +700lb deadlifts.”

AchlysAug, Rogue product-page review, April 2025. Source
Open at RogueDirect link

Official program. Paste the Post Affiliate Pro tracking URL into affiliate_url. Until then the button is the plain product page and earns nothing.

Rogue 13mm powerlifting belt

Rogue Fitness· Specs checked 2026-11-18· Not tested by the site owner

On the IPF list

IPF Approved List of Personal Apparel and Equipment, 2023–2026, updated 8 April 2025. “Rogue 13mm Power lifting Belt”, IPF ID 182, Equipped & Classic. Approved list PDF

Closure
Single prong buckle with a seamless roller. Rogue product page
Thickness
13 mm is in the product name. The specifications list on the same page leaves the Thickness line blank. Rogue product page
Width
4 inches, in the gear specs. Rogue product page
Material
Vegetable-tanned American leather, suede-lined interior. Made in the USA. Rogue product page
Made in
USA. Rogue product page
Price when checked
$152.50. Single price shown on the page. No separate compare-at price was in the extracted text. Source, 2026-11-18
Warranty
No warranty term is stated on the product page. Rogue's warranty index did not name this belt in the text we extracted. Source

The page says the belt is IPF approved. The IPF list entry is "Rogue 13mm Power lifting Belt", ID 182. The blank thickness line is recorded as a gap, not filled in from the title alone.

Common failure points

No linked long-term failure report is on file. That is not a claim that the product never fails.

Open at RogueDirect link

Official program. Paste the Post Affiliate Pro tracking URL into affiliate_url. Until then the button is the plain product page and earns nothing.

Rogue 3 inch Ohio belt

Rogue Fitness· Specs checked 2026-11-18· Not tested by the site owner

On the IPF list

IPF Approved List of Personal Apparel and Equipment, 2023–2026, updated 8 April 2025. “Ohio 3 inch Lifting Belt”, IPF ID 183, Equipped & Classic. Approved list PDF

Closure
Double prong buckle with a seamless roller and bright zinc finish. Rogue product page
Thickness
10 mm. Rogue product page
Width
3 inches. Rogue product page
Material
Natural vegetable-tanned leather. Rogue product page
Made in
Ohio, USA. The page says all Rogue Ohio belts are manufactured in Ohio. Rogue product page
Price when checked
$113.00 (page also showed $125.00). The page showed $113 next to a $125 normal price. Structured data also listed $113, $115, and $125 depending on size. Source, 2026-11-18
Warranty
No warranty term is stated on the product page. Source

3 inches is 7.62 cm, under the IPF and USAPL 10 cm width cap. The page says the belt is IPF approved. The list entry is "Ohio 3\" Lifting Belt", ID 183.

Common failure points

No linked long-term failure report is on file. That is not a claim that the product never fails.

Open at RogueDirect link

Official program. Paste the Post Affiliate Pro tracking URL into affiliate_url. Until then the button is the plain product page and earns nothing.

Rogue Ohio lifting belt, 4 inch

Rogue Fitness· Specs checked 2026-11-18· Not tested by the site owner

Not on the IPF list

Absent from the IPF Approved List of Personal Apparel and Equipment, 2023–2026 (updated 8 April 2025). A product title that says IPF is not approval. Approved list PDF

Closure
Single prong buckle with a seamless roller. Rogue product page
Thickness
10 mm, plus or minus 1 mm. Rogue product page
Width
4 inches. Rogue product page
Material
Vegetable-tanned American leather. Rogue product page
Made in
Ohio, USA. Rogue product page
Price when checked
$131.00 (page also showed $145.00). Page showed $131 next to a $145 normal price. Source, 2026-11-18
Warranty
No warranty term is stated on the product page. Source

This is not the belt named "Ohio 3\" Lifting Belt" on the IPF list. The 4 inch product page we checked does not say IPF approved. The 3 inch Ohio belt is a separate Rogue product and is on the list.

Common failure points

No linked long-term failure report is on file. That is not a claim that the product never fails.

Open at RogueDirect link

Official program. Paste the Post Affiliate Pro tracking URL into affiliate_url. Until then the button is the plain product page and earns nothing.

Gymreapers 13mm lever belt

Gymreapers· Specs checked 2026-11-18· Not tested by the site owner

On the IPF list

IPF Approved List of Personal Apparel and Equipment, 2023–2026, updated 8 April 2025. “Gymreapers Hard Lever Belt 10mm and 13mm”, IPF ID 4, Equipped & Classic. “Gymreapers Soft Lever Belt 10mm and 13mm”, IPF ID 5, Equipped & Classic. Approved list PDF

Closure
Lever. The page says "programmable lever buckle adjustment" and does not say whether this SKU is the hard or soft lever. Gymreapers product page
Thickness
13 mm, described as consistent through the belt (0.51 inches). Gymreapers product page
Width
Listed as "Lever belt height: 4 inches." Gymreapers product page
Material
The product page says durable materials, double stitching, and a suede interior. It does not name the outer hide. Gymreapers product page
Made in
Not stated on the product page. Gymreapers product page
Price when checked
$195.00. Structured data listed $195 and in stock. The visible page also showed a restock notification, so availability was inconsistent. Source, 2026-11-18
Warranty
Lifetime replacement guarantee for defect issues, in Gymreapers' words, at no cost. Source

The IPF list has two lever entries, both in 10 mm and 13 mm: Hard Lever Belt, ID 4, and Soft Lever Belt, ID 5. Gymreapers' certifications page maps "10MM & 13MM Lever Belt" to IDs 4 and 5 and does not say which ID this SKU is.

Gymreapers calls the belt USAPL approved. USAPL Rulebook v2026.2, section 3.1.7, says there is no brand approved list for belts.

The same certifications page names a 10 mm single prong for IPF ID 6. The IPF list text is "Gymreapers Single Prong Belt 10mm and 13mm", ID 6. That prong belt is not given a spec sheet here.

Common failure points

One owner says a Gymreapers lever broke three times, including a snap on the way up from a squat.

“my gym reapers lever broke 3 times. the first time the pin was loose and kept coming out. second time was my fault for misuse. but the third time, today, I was using it perfectly fine, it wasnt too tight, it was perfect, and during the ascent of the second rep of my squat topset, the lever snapped”

u/i_like_taco3, r/powerbuilding, 15 March 2023. Source

Another owner says the lever shattered in under a year and had also flown open mid-lift.

“The lever on my belt literally shattered and hasn’t even been used for a year and didn’t abuse the belt like throwing it around etc. the lever also frequently flew open mid lifts , like at the bottom of a squat with 250 lbs on me”

u/LevelChip5089, r/powerbuilding, 26 November 2023. Source

A later comment on a different thread describes the same break during a squat, and says Gymreapers answered in under 30 minutes and sent a replacement latch.

“I just had the same exact break. Was on my way up from a 365 squat and boom it went. They emailed me back in less than 30 minutes and are sending me a replacement latch.”

u/GarrettSJ, r/Stronglifts5x5, 1 April 2024. Source

Other linked owner reports

A year of regular use with no issue on one belt, and a replacement pin that failed again on a second belt.

“Me and my wife both have Gym Reaper belts. Ive used it 4 times a week for over a year and had no issues. Now I bought my nephew one and the pin fell out of his lever. Gym reaper replaced it. Then it happened again.”

u/Designer_Slice_1077, r/powerbuilding, 29 July 2023. Source
Open at GymreapersDirect link

Public affiliate terms were not available when this site was built. Leave affiliate_url empty and use the plain product URL.

SBD 13mm lever belt

SBD· Specs checked 2026-11-18· Not tested by the site owner

On the IPF list

IPF Approved List of Personal Apparel and Equipment, 2023–2026, updated 8 April 2025. “SBD Belts”, IPF ID 236, Equipped & Classic. “SBD Belts”, IPF ID 237, Equipped & Classic. Approved list PDF

Closure
Patented gliding lever. SBD says it has the adjustability of a prong belt and the tightness of a lever. SBD product page
Thickness
13 mm. SBD calls this the maximum a powerlifting belt is allowed to be. SBD product page
Width
10 cm. SBD product page
Material
Four layers of British cowhide and suede. Black oiled leather finish with a red suede interior on the classic colorway. SBD product page
Made in
Great Britain. SBD product page
Price when checked
$310.00. Classic colorway price shown on the US product page. Source, 2026-11-18
Warranty
The product page documents a size exchange within 30 days of delivery and does not state a breakage warranty. SBD Apparel USA's terms disclaim express and implied warranties. Owner reports below say SBD has still replaced a broken lever. Source

The IPF list says "SBD Belts", IDs 236 and 237. It does not say which ID is 10 mm and which is 13 mm. Both IDs are shown because the public list does not split them.

SBD's US page also says the belt is USAPL and USPA compliant. USAPL does not keep a brand list for belts.

Care copy says not to drop or throw the belt, because that can damage the buckle.

Common failure points

A lifter says the end of an SBD lever broke off during squats. The same comment says SBD sent a replacement.

“For me the entire end of the lever broke of when i were doing squats, but SBD replied quickly to me and sendt me a replacement, and i sendt them the broken one back”

u/Several-Doctor-759, r/powerbuilding, 12 September 2024. Source
Open at SBDDirect link

Plain product URL. No tracking link is configured.

SBD 10mm lever belt

SBD· Specs checked 2026-11-18· Not tested by the site owner

On the IPF list

IPF Approved List of Personal Apparel and Equipment, 2023–2026, updated 8 April 2025. “SBD Belts”, IPF ID 236, Equipped & Classic. “SBD Belts”, IPF ID 237, Equipped & Classic. Approved list PDF

Closure
Patented gliding lever, described as a low-profile buckle. SBD product page
Thickness
10 mm. SBD product page
Width
10 cm. SBD product page
Material
Two different cuts of hide, British cowhide. Classic colorway is black oiled leather with a red suede interior. Edges and corners are rounded. SBD product page
Made in
Sheffield, Great Britain. SBD product page
Price when checked
$310.00. Classic colorway price shown on the US product page. Same dollar figure as the 13 mm classic belt that day. Source, 2026-11-18
Warranty
A durability warranty is not stated on the product page we checked. SBD Apparel USA's terms disclaim express and implied warranties. Source

Same IPF list line as the 13 mm belt: "SBD Belts", IDs 236 and 237, with no public split by thickness.

Common failure points

No linked long-term failure report is on file. That is not a claim that the product never fails.

Open at SBDDirect link

Plain product URL. No tracking link is configured.

Inzer Forever Lever Belt 13mm

Inzer Advance Designs· Specs checked 2026-11-18· Not tested by the site owner

On the IPF list

IPF Approved List of Personal Apparel and Equipment, 2023–2026, updated 8 April 2025. “INZER Lever Belts”, IPF ID 272, Equipped & Classic. Approved list PDF

Closure
Patented lever. Inzer says it can be set up to three inches tighter than a standard buckle. Inzer product page
Thickness
13 mm. Inzer describes this as the choice for lifters who want maximum belt thickness, and recommends the 10 mm belt for XS and Small. Inzer product page
Width
Not given as a measurement. Inzer says the edges are not rounded so that "the complete competition legal width is maintained." Inzer product page
Material
"One solid thickness" of leather, plus an internal "Reinforced Leather" component. Six rows of lock-stitch. Suede inner surface. Not layers glued together, in Inzer's words. Inzer product page
Made in
USA. Inzer product page
Price when checked
$139.00. Variant price in the page data, shown as the regular price. Source, 2026-11-18
Warranty
The product page says "Guaranteed Forever." Inzer's support page says performance guarantees start when you receive the product and stay tied to that original date if the item is repaired or replaced. Unused returns are two weeks. Source

The IPF entry is "INZER Lever Belts", ID 272. The list does not state a millimetre thickness. A separate entry, "INZER Belt with prongs", is ID 271 and is not this lever belt.

Common failure points

A long-time Inzer lever user describes the usual break as the casting or the hinge pin, and says their own belt was past five years without that.

“When they break, the cheap casting breaks or the pin on the hinge for the lever shears through. Mine's going on 5+ years now but I never drop it and never let the lever flip open on it's own”

u/northernhiro, r/powerlifting, 22 December 2014. Source

Other linked owner reports

Another comment in the same 2014 thread had not seen a lever failure in a large local group.

“i know about 20-30 inzer lever users. don't know of anyone ever having any lever failure.”

u/JohnQTwisted, r/powerlifting, 22 December 2014. Source

A 2020 comment claims there is plastic inside an Inzer belt. Inzer's page says leather plus an internal Reinforced Leather component. We have not cut one open.

“The main difference is that Inzers actually have plastic inside the belt, so it’ll never lose its curved shape and will never truly be “broken in” or mold to you.”

u/walklikeaduck, r/StartingStrength, 5 July 2020. Source
Open at InzerDirect link

Plain product URL. No tracking link is configured.

Inzer Forever Lever Belt 10mm

Inzer Advance Designs· Specs checked 2026-11-18· Not tested by the site owner

On the IPF list

IPF Approved List of Personal Apparel and Equipment, 2023–2026, updated 8 April 2025. “INZER Lever Belts”, IPF ID 272, Equipped & Classic. Approved list PDF

Closure
Patented lever. Inzer product page
Thickness
10 mm. Inzer says it conforms sooner and is considered by some to be more comfortable. Inzer product page
Width
Not given as a measurement. Same "competition legal width" wording as the 13 mm page. Inzer product page
Material
One solid thickness of leather, internal Reinforced Leather component, four rows of lock-stitch, suede inner surface. Inzer product page
Made in
USA. Inzer product page
Price when checked
$129.95. Variant price in the page data. Source, 2026-11-18
Warranty
Product page says "Guaranteed Forever." The support-page performance guarantee is the same document cited on the 13 mm belt. Source

Same IPF entry as the 13 mm lever: "INZER Lever Belts", ID 272. The list does not split 10 mm from 13 mm.

Common failure points

No linked long-term failure report is on file. That is not a claim that the product never fails.

Open at InzerDirect link

Plain product URL. No tracking link is configured.

IBRO 13mm lever belt, all black

IBRO· Specs checked 2026-11-18· Not tested by the site owner

Not on the IPF list

Absent from the IPF Approved List of Personal Apparel and Equipment, 2023–2026 (updated 8 April 2025). A product title that says IPF is not approval. Approved list PDF

Closure
Steel lever. IBRO calls it a quick lever closure. IBRO listing
Thickness
Conflicts on the same page. The title says 13 mm. The description then says the belt has 10 mm thickness. IBRO listing
Width
4 inches of back support, which is IBRO's phrase. IBRO listing
Material
Described as premium cowhide / genuine leather, contrasted with suede. IBRO listing
Made in
Not stated on the listing. IBRO listing
Price when checked
$69.99. Price on IBRO's own site. Every size in the page data was out of stock. The Amazon price was not recorded. The buy button opens the IBRO Amazon store, not one checked ASIN. Source, 2026-11-18
Warranty
IBRO says it offers a one-year warranty and will replace the belt for free if there is any problem. Source

IBRO writes that the belt is "USAPL, IPF, WPC, and GPC complaint." That sentence is not IPF approval, and it is not a USAPL approved-list entry. IBRO does not appear on the IPF list updated 8 April 2025. USAPL has no brand list for belts.

The buy link is the IBRO Amazon store because IBRO has no in-house affiliate program. Specs were read on ibrogear.com, not on an Amazon title.

Common failure points

A lifter reported an IBRO lever clasp breaking within a month. The comment does not say whether the belt was 10 mm or 13 mm.

“I started off with the Ibro lever belt from Amazon and strongly recommend against that one. A prong broke off the clasp within a month of using it.”

u/Thebluereverend, r/fitness30plus, 3 September 2023. Source
Open at AmazonDirect link

IBRO has no in-house affiliate program. Buy links go to the IBRO Amazon store. Add an Associates URL in affiliate_url when the tag exists.

IBRO 10mm lever belt, black and white

IBRO· Specs checked 2026-11-18· Not tested by the site owner

Not on the IPF list

Absent from the IPF Approved List of Personal Apparel and Equipment, 2023–2026 (updated 8 April 2025). A product title that says IPF is not approval. Approved list PDF

Closure
Steel lever. IBRO calls it a quick lever closure. IBRO listing
Thickness
10 mm in both the title and the description. IBRO listing
Width
4 inches of back support, which is IBRO's phrase. IBRO listing
Material
Described as premium cowhide / genuine leather. IBRO listing
Made in
Not stated on the listing. IBRO listing
Price when checked
$69.99. Price on IBRO's own site. The offer data showed the belt out of stock. The Amazon price was not recorded. Source, 2026-11-18
Warranty
IBRO says it offers a one-year warranty and will replace the belt for free if there is any problem. Source

Same approval sentence as the 13 mm listing: "USAPL, IPF, WPC, and GPC complaint." IBRO is not on the IPF approved list. This 10 mm listing does not contain the 13 mm page's thickness contradiction.

Common failure points

A lifter reported an IBRO lever clasp breaking within a month. The comment does not say whether the belt was 10 mm or 13 mm.

“I started off with the Ibro lever belt from Amazon and strongly recommend against that one. A prong broke off the clasp within a month of using it.”

u/Thebluereverend, r/fitness30plus, 3 September 2023. Source
Open at AmazonDirect link

IBRO has no in-house affiliate program. Buy links go to the IBRO Amazon store. Add an Associates URL in affiliate_url when the tag exists.

Questions

Are lever belts legal in the IPF?

Yes. IPF Technical Rules effective 1 March 2026, section 3.6, allow a buckle with one or two prongs or a quick-release type, and the rule says quick release means lever. The belt still has to be from a manufacturer on the IPF approved list, at most 10 cm wide and 13 mm thick, without extra padding.

Does USAPL use the IPF belt list?

No. USA Powerlifting Rulebook v2026.2, section 3.1.7, says there is no approved list for anything except supportive squat suits, bench shirts, and deadlift suits. Section 3.14 caps belt width at 10 cm and does not state a thickness maximum.

Is 10 mm or 13 mm the better belt?

13 mm is the IPF maximum thickness. Inzer describes 10 mm as conforming sooner and 13 mm as the choice for lifters who want maximum thickness, and tells XS and Small lever-belt buyers to take 10 mm. SBD describes its 13 mm belt as four layers of British cowhide at 10 cm wide, and its 10 mm belt as two cuts of hide with rounded edges. This site does not turn that into a ranking.

Why is the Rogue 4 inch Ohio belt marked not listed when the 3 inch Ohio belt is listed?

The IPF list entry is "Ohio 3 inch Lifting Belt," ID 183. Rogue's 4 inch Ohio lifting belt is a different product. The 4 inch page checked on 18 November 2026 does not say IPF approved.