Buying guide
Best knee sleeves for powerlifting
Updated 2026-11-18. IPF list used: 8 April 2025.
A legal powerlifting sleeve is a neoprene tube. The arguments that matter are whether it is on the IPF list, whether it is actually 7 mm and no longer than 30 cm, and whether the seam survives being dragged over a knee twice a week.
The IPF rules, section 3.8, allow sleeves only from the approved list, at most 7 mm and 30 cm, one ply of neoprene or neoprene plus a non-supportive fabric layer, with no straps or holes. The IPF also allows a coach to help you get them on.
USAPL v2026.2, section 3.11, copies the 7 mm and 30 cm caps and the single-ply construction. Section 3.1.7 says there is no brand list for sleeves. Section 3.11.8 says you put them on yourself. A page that says “USAPL approved” is marketing unless the sleeve also meets those measurements.
What was on the pages
SBD powerlifting knee sleeves are 7 mm and a full 30 cm, which is the maximum length, in high-density neoprene, made in Great Britain. The US price checked was $145. SBD says they are IPF approved. The list has “SBD Powerlifting Knee Sleeves,” ID 247, and “SBD Knee Sleeves,” IDs 242, 243, and 248. There is no public map from this colorway to one of those IDs, so the sheet shows all of them. SBD’s washing note says a dryer or a hard spin can wreck the rubber. Owner reports cut both ways: a back seam ripped at three months in 2015; a pair from 2014 was still going in 2022 with peeling lettering; another lifter reported no tear in five years; another wore through the knee in about two years and glued it. The product page does not state a breakage warranty.
Gymreapers 7 mm sleeves are neoprene with reinforced stitching, $59.99 in the page data, with a one-year replacement guarantee for defects. IPF ID 2 is “Gymreapers Knee Sleeves.” Gymreapers’ certifications page is the document that attaches “7 mm” to that ID. Length is not on the product page. No long-term tear report for these sleeves is on file. The owner’s positive view of the brand is not a sleeve test.
Rogue’s 7 mm pair is a US-made SBR/neoprene blend. The page showed $55 against a $70 price. The IPF entry is “Rogue 7MM Knee Sleeve,” ID 184. Length is not stated. The same URL also contains a specifications block that says 5 mm. Rogue sells a separate 5 mm sleeve. The 5 mm line is flagged on the sheet and is not treated as the spec of the 7 mm product. No long-term failure report is on file.
Inzer ErgoPro is 7 mm, double stitched over welded seams, made in Texas, $135 in the page data. The IPF line is “INZER ErgoPro Knee Sleeves & INZER ErgoPro Kona Knee Sleeves,” ID 270. A different Inzer sleeve is ID 269. Length is not stated. Inzer’s general performance guarantee covers the company, and the sleeve page does not add a separate term. No tear report for the ErgoPro is on file.
The only product the site owner has written up from their own training is the IBRO belt, which is not a sleeve and is not on the IPF list.
| Product | Thickness | Length | Material | IPF list | Price checked |
|---|---|---|---|---|---|
| SBD powerlifting knee sleeves | 7 mm high-density neoprene. | Full 30 cm. SBD says that is the maximum allowable length. | Single description of high-grade neoprene with heavyweight linings, edging, and seams. Sold as a pair. Made in Great Britain. | Listed, ID 247, 242, 243, 248 | $145.00 |
| Gymreapers 7mm knee sleeves | 7 mm neoprene. | Not stated on the product page. | Neoprene, contoured, reinforced stitching. Sold as a pair. A carrying bag is included. | Listed, ID 2 | $59.99 |
| Rogue 7mm knee sleeve, pair | 7 mm in the product name, the gear-spec material line, and the description. A later specifications list on the same page says 5 mm. See the note. | Not stated on the product page. | SBR/neoprene blend. Sold as a pair. Black with white Rogue branding on the color checked. | Listed, ID 184 | $55.00 |
| Inzer ErgoPro knee sleeves | 7 mm. | Not stated on the product page. | Inzer says premium construction, double stitched on top of welded seams, sold with a draw-string bag. | Listed, ID 270 | $135.00 |
SBD powerlifting knee sleeves
- Thickness
- 7 mm high-density neoprene. SBD product page
- Length
- Full 30 cm. SBD says that is the maximum allowable length. SBD product page
- Material
- Single description of high-grade neoprene with heavyweight linings, edging, and seams. Sold as a pair. Made in Great Britain. SBD product page
- Made in
- Great Britain. SBD product page
- Price when checked
- $145.00. Price shown on the US product page for the 7 mm powerlifting sleeves. Source, 2026-11-18
- Warranty
- A durability warranty is not stated on the product page we checked. SBD Apparel USA's terms disclaim express and implied warranties. Source
The IPF list has "SBD Powerlifting Knee Sleeves", ID 247, and "SBD Knee Sleeves", IDs 242, 243, and 248. SBD's page says the 7 mm powerlifting sleeves are IPF approved. There is no public crosswalk from colorway to one ID.
SBD says to hand wash and air dry, and that a machine spin or a dryer can damage the neoprene.
Common failure points
An owner washed a pair gently and still had the back seam rip at three months.
“I had a pair that ripped along the back seam after 3 months :( I only ever wore them for squatting and washed them on a gentle cycle with air dry. Seems like this is a common complaint for them.”
A later owner wore the neoprene through at the knee in about two years and glued it.
“I've trashed both. However, my SBD's wore out at the knee. I easily fixed that with neoprene glue. It took me two years to do that and I got four more years after that.”
Other linked owner reports
Another lifter reported no tear in more than five years.
“Never used strong but I love my SBDs. Never had a tear in over five years”
Open at SBDDirect linkA pair owned since 2014 was still in use in 2022, with lettering starting to peel.
“I've had my SBD sleeves since 2014, the lettering is just now starting to peel off but other than that they have been awesome.”
Gymreapers 7mm knee sleeves
- Thickness
- 7 mm neoprene. Gymreapers product page
- Length
- Not stated on the product page. Gymreapers product page
- Material
- Neoprene, contoured, reinforced stitching. Sold as a pair. A carrying bag is included. Gymreapers product page
- Made in
- Not stated on the product page. Gymreapers product page
- Price when checked
- $59.99. Structured data said $59.99 and in stock. The page HTML also included a restock widget, so availability was not clean. Source, 2026-11-18
- Warranty
- One-year replacement guarantee for defect issues, on the product page. Source
IPF list: "Gymreapers Knee Sleeves", ID 2. The list line does not say 7 mm. Gymreapers' certifications page maps "7MM Knee Sleeves" to ID 2.
Because length is not on the product page, this site does not confirm the 30 cm IPF and USAPL maximum from the listing. The list entry is the IPF approval. USAPL still measures length at equipment check and does not use a brand list.
Common failure points
Open at GymreapersDirect linkRogue 7mm knee sleeve, pair
- Thickness
- 7 mm in the product name, the gear-spec material line, and the description. A later specifications list on the same page says 5 mm. See the note. Rogue product page
- Length
- Not stated on the product page. Rogue product page
- Material
- SBR/neoprene blend. Sold as a pair. Black with white Rogue branding on the color checked. Rogue product page
- Made in
- USA. Rogue product page
- Price when checked
- $55.00 (page also showed $70.00). Page showed $55 next to a $70 normal price. Source, 2026-11-18
- Warranty
- No warranty term is stated on the product page. Source
The specifications block that says "5mm thick SBR/Neoprene blend" and "IPF and IWF Legal for Raw and Open Competition" sits on the 7 mm product URL. Rogue also sells 3 mm and 5 mm sleeves. We did not treat the 5 mm line as the spec of this 7 mm product. The IPF list has "Rogue 7MM Knee Sleeve", ID 184.
Length is not published on the page, so the 30 cm maximum is not confirmed from the listing.
Common failure points
Open at RogueDirect linkInzer ErgoPro knee sleeves
- Thickness
- 7 mm. Inzer product page
- Length
- Not stated on the product page. Inzer product page
- Material
- Inzer says premium construction, double stitched on top of welded seams, sold with a draw-string bag. Inzer product page
- Made in
- Texas, USA. Inzer product page
- Price when checked
- $135.00. Variant price in the page data. Source, 2026-11-18
- Warranty
- No separate sleeve warranty is stated on the product page. Inzer's support page describes the general performance guarantee. Source
IPF list: "INZER ErgoPro Knee Sleeves & INZER ErgoPro Kona Knee Sleeves", ID 270. A different line, "INZER Knee Sleeves", is ID 269. This page is the ErgoPro, so the ID used here is 270.
Inzer says the sleeves are approved in many federations, including the IPF and the USPA. Length is still not on the page.
Common failure points
Open at InzerDirect linkQuestions
How thick can knee sleeves be?
Both the IPF technical rules and USAPL Rulebook v2026.2 cap knee sleeves at 7 mm thick and 30 cm long. They have to be a single ply of neoprene, or neoprene plus a non-supportive fabric layer, with no holes, straps, or Velcro. In the IPF, the sleeve also has to be from a manufacturer on the approved list. USAPL has no brand list for sleeves.
Can someone help you put knee sleeves on?
The IPF technical rules say athletes may receive help putting sleeves on. USAPL section 3.11.8 says lifters may not use help, including another person, plastic bags, or powder, and may be asked to show they can put the sleeves on alone.
Are Gymreapers knee sleeves IPF approved if the page does not list the length?
The IPF list includes "Gymreapers Knee Sleeves," ID 2. Gymreapers' certifications page maps the 7 mm sleeves to that ID. The product page does not state a length, so this site does not confirm the 30 cm maximum from the listing. USAPL will still measure them.